Fall Prevention Alarms
Home >> Fall Prevention Alarms
Fall Alarms and Pads. Call (888) 708-0702 for pricing or fill out a contact form.
|
Soft-Fall Bedside Mat
|
| CMS recommends surrounding beds with soft mats when side rails cannot be used. Durable, easy-storage mats are designed to reduce the impact of falls |
|
|
• Provide extra protection against fall-related injuries
• Available in two thicknesses: two-inch ultra high-density foam, and four-inch high-density foam
• Covered in durable, wipe-clean vinyl
• Slip-resistant bottom keeps mat safely in place
• One-piece version slips under the bed
• Folding version can be easily stored in a closet
• Folding version's strap secures mat to footboard or hangs from a wall hook |
|
|
|
|
|
|
Wheelchair Sensor Pad Alarm
|
| Sensor Pad Alarm monitors fall-risk wheelchair patients. Works with both ChairPro and MultiPro alarm units. |
|
|
• Alarm activates if patient leaves or falls from chair
• Automatically resets when patient sits down
• Vinyl protective cover protects sensor against incontinence
• Operates on single 9-volt battery (included)
• Alarm unit guaranteed for one year
• Choose 45-day or 180-day sensor pad (both are 7” x 15”)
• Works with both ChairPro and MultiPro alarm units.
Please note:
• Models 909350 and 909355 include one ChairPro alarm unit with one sensor pad.
• Models 909360 to 909365 are replacement sensor pads that work with both the ChairPro and MultiPro alarm units. Purchase them for use with the ChairPro unit, or purchase them together with a MultiPro unit.
• The MultiPro alarm unit is sold separately (without any sensor pads) and can be found under model number 909510 |
|
|
OverMattress Alarm System
|
| Alerts caregivers to unassisted bed exits. Works with BedPro and MultiPro alarm units. |
|
|
• Unique printed circuitry in sensor pad improves monitoring sensitivity
• Flexible wire connection increases reliability
• System comes with popular 10" x 30" sensor pad
• Chose 45-day or 90-day sensor pad
• Alarm unit guaranteed for one year
• Operates on a/c or battery power
Please note:
• Models 909310 and 909311 include one BedPro alarm unit with one sensor pad.
• Models 909314 to 909319 are replacement sensor pads that work with both the BedPro and MultiPro alarm units. Purchase them for use with the BedPro unit, or purchase them together with a MultiPro unit.
• The MultiPro alarm unit is sold separately (without any sensor pads) and can be found under model number 909510 |
|
MultiPro Alarm
|
| MultiPro is the ONE ALARM for Wheelchair and Bed |
|
|
• Save money and reduce training time with Skil-Care's MultiPro.
• This single alarm unit is easily transferred from the wheelchair to bed.
• There's no need to purchase multiple alarm control units or train your staff how to use different systems.
• Simply connect MultiPro to any bed or chair sensors to monitor all your fall-risk residents.
• Indicator light that tells you the alarm is on
• High/Low volume switch allows choice of 90-decibel or 80-decibel signal
• Auto-reset that puts alarm in stand-by -there's no need to remember to turn it on
• Nurse-call connection for use when monitoring residents in bed
• Power-test button to verify that battery has sufficient power
• Integral bracket that permits easy mounting to any wheelchair
• Velcro(r) strips that secure unit to bed headboard or wheelchair
• Guaranteed for one full year
The MultiPro Alarm is sold as a unit to be used in conjunction with the following products:
UnderSeat Sensor
Seat Belt w/Buckle Alarm
Lift-Off Lap Cushion Alarm
E-Z Release Belt Alarm
Wheelchair Sensor Pad Alarm
Gel-Foam Pad Alarm
Leveling Pad Alarm
Early Warning Bed Alarm
UnderMattress Alarm
OverMattress Alarm
MultiPro Nurse-Call Connector Kit
Chair and /or bed sensors must be ordered separately. When you place your order, you must provide your medical supply dealer with the model number of the alarm control unit plus the model number(s) of the sensor(s) you wish to purchase with the alarm unit. |
|
|
|
